Tiled stove

The tiled stove in the living room is heated through the access in the kitchen.

Place approx. 3-4 logs of wood in the middle compartment. Then 2-3 thinner logs to light the fire and 1 larger log on top.

To light the fire, pull out the plug link completely.

Once the fire is burning properly, the plug can be pushed back halfway.

PLEASE NOTE:

The amount of wood listed above is sufficient to heat up the stove and it will radiate heat for 8-12 hours.

If necessary, add a maximum of 1-2 logs after 20-30 minutes. This quantity should normally be sufficient to heat the living room to 27-30°.

Overheating may cause the tiled stove to burst.

If the stove is used regularly, empty the bottom compartment. The COOLED ash must be disposed of as normal.